The GRAPHITE passive infrared detector detects movement ina protected area. The large coverage area (over 100 m2) has beenachieved owing to the patented geometry of Fresnel lenses. Hence,
fewer detectors are needed for effective protection, installation issimple, and investment costs are low. Operation of the device is based on a digital motion detectionalgorithm. Digital temperature compensation ensures effectiveness ofthe detection by adjusting sensitivity to the temperature in the room. The sensitivity of detection is continuously adjustable, henceparameters of the detector can be adjusted precisely to the size of theroom and the conditions prevailing in it. A useful solution is switching remotely on/off the violation indicatingLED (without opening the detector enclosure). As a result, the LEDcan be turned on e.g. when testing the alarm system, and turned off inthe normal operation mode so as to make the detectorless conspicuous. The alarm memory signaling function allows you to check which ofthe detectors has initiated alarm, without having to watch the state ofthe control panel. Security of the detector operation is provided bymonitoring the signal path and power supply as well as thetamper switch. high quality dual element pyrosensor new generation DSP and analysis algorithm precise LODIFF Frensel sealed optics digital temperature compensation remotely triggered test mode alarm latch feature adjustable mounting bracket included build–in EOL resistors TECHNICAL DATA Supply voltage 12 V DC Detected target velocity 0,3…3 m/s Operating temperature range -30…+55 °C Recommended mounting height 2,4 m Standby mode current consumption 14 mA Max. current consumption 14 mA Weight 94 g Relay contacts rated load (resistive) 40 mA / 16 V DC Maximum humidity 93±3% Dimensions 63 x 96 x 49 mm Environmental class according to EN50130-5 II Alarm signaling time 2 s Complied with standards EN50131-1, EN50131-2-2, EN50130-4, EN50130-5 Security grade according to EN50131-2-2 Grade 2 EOL resistors 2 x 1,1 k Warm-up period 30 s The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for
ما آماده پاسخگويي در تمام زمينه هاي مربوط به فعاليت های گروه فنی مهندسی پارس ایمن لاریچه هستيم. لطفا جهت ارتباط با ما، درخواست خود را از طریق ایمیل برای ما ارسال فرمایید و یا از طریق تلفن با ما ارتباط برقرار کنید.