INT-O

OUTPUT EXPANSION MODULE 
The output expansion module, designed for use inconjunction with the control panels of INTEGRA, INTEGRA Plus, 
VERSA and VERSA Plus families, as well as with ACCO–NT 
access control panel. This device replaces the CA–64 O–OC, CA–64O–R and CA–64 O–ROC modules. The INT–O allows for expansionof the system by additional 8 wired outputs. An additional tamperinput helps detect unauthorized opening of the enclosure in which themodule is installed. 
system expansion with 8 outputs:
8 low current outputs, OC type
up to 8 relay outputs
each OC type output is connected in parallel torelay output
capability to reduce power consumption by disablingsupport for selected relay outputs
ability to connect to RS–485 bus (firmware update viathe bus) 
TECHNICAL DATA 
Supply voltage 12 V DC 
Operating temperature range -10 °C...+55 °C 
Standby mode current consumption 30 mA 
Max. current consumption 160 mA 
Weight 90 g 
Maximum humidity 93±3% 
Current consumption by active relay 16 mA 
Dimensions 140 x 68 mm 
Environmental class according to EN50130-5 II 
OC outputs rating 50 mA / 12 V DC 
Relay outputs rating (resistive load) 2 A / 24 V DC 
+12 V output rating 2,5 A / 12 V DC 
Security grade acc. to EN 50131 (without power supply) Grade 3 
Security grade acc. to EN 50131 (with APS-412 power supply) Grade 2 
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only. www.satel.eu

قیمت : تماس

• بعدی >