GPRS-T6 

GPRS/SMS REPORTING MODULE WITH BUFFER POWER SUPPLY 

The versatile GPRS–T6 communication unit is designed for GPRSand SMS monitoring from any alarm control panel or other device. Anadditional functionality of the GPRS–T6 unit is the remote control of 
the module's outputs, which allow for e.g. activation or deactivation ofthe alarm system stand–by mode using SMS. The built–in bufferpower supply in the GPRS–T6 module allows continued 
communication even if the main power supply fails. 
8 monitoring triggering or message inputs
dedicated inputs for alarm system failure signals
dedicated input for AC power supply monitoring
4 outputs with remote control option
automatic switching to SMS in case of lack of GPRS signal
SMS/CLIP messaging
sending test transmission using CLIP
communication failure signalling
built–in 2 A buffer power supply 
TECHNICAL DATA 
Environmental class II 
Number of OC outputs 4 
Power supply type A 
Number of inputs (zones) 8+3 
Power supply rating 2 A 
Board dimensions 120 x 68,5 mm 
Operating temperature range -10...+55 °C 
Current consumption from 230 V mains - standby 110 mA 
Current consumption from 230 V mains - maximum 150 mA 
Current consumption from battery - maximum 400 mA 
Current consumption from battery - standby 120 mA 
Recommended transformer type TR40VA (40VA / 18VAC) 
Output voltage range 10,5…13,8 V DC 
Battery failure voltage threshold (±10%) 11 V 
Battery cut-off voltage (±10%) 10,5 V 
Number of outputs power 1 
Supply voltage (±10%) [V AC] 18 V AC 
Battery charging current (±20%) 250 mA 
Device + housing weight 1012 g 
Permissible voltage on the ACE up to 25 V 
Current carrying capacity of the output +12V 500 mA 
Current carrying capacity of the output operating as a malfunction indicator 50 mA 
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only. www.satel.eu

قیمت : تماس

• < قبلی
• بعدی >